上海林诺仪器仪表有限公司

The Series 300 can be hand held or fixed in position and provides a high level of functionality & monitoring capability.   Product Details...

S200 smart Ozone Monitor, a gas-sensing semiconductor sensors, MIN (minimum), MAX (the largest), AVE (the average readings), the voice alarm function, 0.1/0.01/0.001 resloution , ppm and switch between mg/m3  Product Details...

The Z-1200 Ozone Meter is a hand held instrument which measures ozone concentration, in air, with a range of 0-2 ppm and a resolution of 0.02 ppm. The instrument has an LCD display, which is updated every 10 seconds. A 15-minute average (STEL) and an hourly average can also be viewed. The meter also features a low battery indicator and an audible alarm, which can be set at any level from 0-2 ppm.   Product Details...

The Series 500 includes the same features and functionality of the Series 300 but with the added feature of onboard and PC data logging.   Product Details...

Z-1200XP is a portable desktop instrument which features an internal pump. Ozone concentration in air can be measured with a resolution of 0.01 ppm and a range 0-2 ppm. The LCD display outputs the concentration (in ppm) every 10 seconds. The instrument also computes a 15-minute average and a Time Weighted Average (updated hourly for up to 8 hours). These values can be viewed anytime during the measurement procedure. The internal pump can be combined with an extendable probe, to make it possible to sample from hard to reach areas or confined spaces. With the data-logging feature enabled, the meter will store all of the exposure points for each use. The maximum storage capacity is 14,400 data points. This is the equivalent of 5 separate 8-hour uses. The data is easily uploaded to PC using components available within the Microsoft Windows Operating System or the terminal software included with the instrument.  Product Details...

GS80 臭氧控制器，提供先进的气体测量手段和低成本高效率的气体测量方案.5V电压信号输出,拥有继电器控制功能  Product Details...

A-21ZX portable ozone sensor provides a reliable and inexpensive way of checking generators, valves, piping and general environments for ozone leaks and for estimating ozone levels. It can be used as a permanent monitor indoors when concentrations average below .1 ppm. It may be used outdoors for ozone studies in moderate temperature conditions.   Product Details...

Low Cost Ozone Analyzer

The model UV-100 ozone analyzer is for general purpose measurement of ozone in air. Its range is 0.01-900 ppm (v) with 2% accuracy, and it includes a built-in data logger.

  Product Details...

S900 Ozone Transmitter suppot 4-20mA(isolated Output), and RS485 Digital Output as well.   Product Details...

Model 202 Ozone Monitor™ is designed to enable accurate and precise measurements of ozone ranging from low ppb (precision of ~1 ppb) up to 100,000 ppb (0-100 ppm) based on the well established technique of absorption of UV light at 254 nm.    Product Details...